Farasis
| Availability: | |
|---|---|
| Quantity: | |
FARASIS MP14104294P73J CELL
The Farasis MP14104294P73J is a large-format rechargeable lithium-ion pouch cell. Its datasheet lists a rated capacity of 73Ah at 1/3C, a nominal voltage of 3.65V at 1/3C, and a continuous discharge rating of 220A (3C) at 25°C.
The current rating, cycle-life result and fast-charge times are tied to the conditions stated in the manufacturer document. Pack designers should verify voltage limits, current profile, temperature control, mechanical support and protection settings for the complete system before selecting the cell for a specific project.
FARASIS MP14104294P73J CELL
| Manufacturer | Farasis Energy (Gan Zhou) Co., Ltd. |
| Battery Cell Model | MP14104294P73J |
| Cell Type | Rechargeable lithium-ion cell; pouch format shown in the datasheet drawing |
| Rated Capacity | 73Ah at 1/3C; 70.6Ah at 1C Capacity test range: 4.25V to 2.5V at 25°C |
| Rated Energy | 267Wh at 1/3C; 255Wh at 1C |
| Nominal Voltage | 3.65V at 1/3C; 3.6V at 1C |
| Operating Voltage Range | 2.75–4.2V at 25°C, as listed in the datasheet; confirm pack charge and discharge cutoffs with the manufacturer |
| Gravimetric Energy Density | 285Wh/kg at 1/3C |
| Volumetric Energy Density | 610Wh/L at 1/3C |
| Continuous Discharge Current | 220A (3C) at 25°C |
| Maximum Discharge Current | 325A (4.5C), 10-second pulse at 25°C and 50% SOC |
| Charging Current Entry in Source | 175A (2.4C), 10-second pulse at 25°C and 50% SOC; the English field label says “Max. Charging Time” despite listing amperes. Confirm the intended rating before design use. |
| Fast-Charging Performance | 43 minutes from 10% to 80% SOC; 36 minutes from 30% to 80% SOC. Other test conditions are not stated in the supplied sheet. |
| Charging Temperature Range | −20°C to 55°C |
| Discharging Temperature Range | −30°C to 55°C |
| Width (W) | 103.9 ± 1mm |
| Length (L1) | 294.4 ± 1mm |
| Length (L2) | 350.4 ± 3mm; drawing dimension includes the tab-height reference shown as L2 |
| Thickness (T) | 14.3 ± 0.40mm |
| Weight | 934 ± 10g |
| Cycle Life | ≥1,500 cycles at 1C/1C, 25°C, to 80% SOH |
FARASIS MP14104294P73J CELL
The datasheet also reports 70.6Ah at 1C. Keep the test rate and stated capacity cutoff conditions attached when comparing this cell with other models.
The manufacturer lists 220A (3C) at 25°C as continuous discharge current. A separate 325A (4.5C) rating is specified only for a 10-second pulse at 25°C and 50% SOC.
At 1/3C, the sheet lists 285Wh/kg gravimetric and 610Wh/L volumetric energy density. These are cell-level figures; a finished pack will have different system-level energy density.
The reported result is at least 1,500 cycles at 1C/1C and 25°C to 80% SOH. Confirm the full cycle-test procedure before using this figure in a project forecast.
FARASIS MP14104294P73J CELL
The datasheet provides cell-level electrical and dimensional ratings but does not identify approved end-use applications. The following are project directions to evaluate against the complete system requirements, not manufacturer application approvals.
Large-format custom battery packs. The 73Ah rated capacity and pouch format may be considered where the pack architecture can accommodate the cell dimensions and mechanical requirements.
Mobility or industrial power systems. The continuous-current and pulse-current figures may be relevant when evaluating a load profile, provided the system is validated at its actual temperature and duty cycle.
Energy-storage pack development. Consider the cell only after checking voltage-window compatibility, cycle-life target, thermal design and pack-level energy requirements.
01. Confirm electrical limits. The datasheet lists 2.75–4.2V as the operating range and separately gives a capacity test range of 4.25V to 2.5V at 25°C. Do not treat those entries as interchangeable pack cutoffs.
02. Design around the stated current conditions. The 220A rating is continuous at 25°C; 325A is a 10-second pulse rating at 25°C and 50% SOC. Validate the real load profile and resolve the charging-current label with the manufacturer.
03. Check pouch-cell mechanics and protection. Confirm tab arrangement, dimensions, swelling allowance, compression approach, thermal management, BMS settings and pack-level safety measures for the intended design.
For a wider view of available pouch-cell formats, see the MisenPower NCM pouch-cell range. For model identification and project checks, review the Farasis pouch-cell model selection guide and the pouch-cell selection guide for custom battery packs. Match P73J details to its own current manufacturer datasheet; similarly named variants may have different specifications.
It lists 73Ah at 1/3C and 70.6Ah at 1C. The capacity entry gives a 4.25V to 2.5V test range at 25°C, so compare capacity values only with their test basis in view.
No. The datasheet lists 220A (3C) at 25°C as continuous discharge current. The 325A (4.5C) figure is listed for a 10-second pulse at 25°C and 50% SOC.
The drawing lists W 103.9 ± 1mm, L1 294.4 ± 1mm, L2 350.4 ± 3mm and thickness 14.3 ± 0.40mm. Check the drawing and confirm terminal clearances and mechanical allowances with the manufacturer.
FARASIS MP14104294P73J CELL
Misen Power supplies battery cells and supports battery-project evaluation and pack integration. Farasis is the manufacturer of the cell described here; confirm the exact model, revision and project fit against the applicable manufacturer documentation.
Share the required model, quantity, destination and project timing so availability and commercial terms can be checked for your request.
Ask for the applicable datasheet revision and supporting technical documents for the specific model and shipment. Document availability and sharing permissions should be confirmed.
For projects that need pack integration, discuss cell arrangement, BMS selection, interconnects, enclosure structure and thermal design with the Misen Power team.
Use the inquiry form on this product page and include your quantity, destination, application, required current profile and installation dimensions. The team can then confirm model availability and applicable technical information for your project.