loading
EVE
| Availability: | |
|---|---|
| Quantity: | |
EVE INP05P CELL
The EVE INP05P is a rechargeable lithium-ion cell with a prismatic aluminum case, a nominal voltage of 3.67V and a minimum capacity of 5.5Ah at 1C. Its specified initial AC resistance is 0.75±0.10mΩ, measured at 1kHz and 30% state of charge.
The specification reports 5C charge/5C discharge cycling at several temperatures, including 5,000 cycles at 25°C with at least 80% capacity retention. These are defined test results; pack suitability requires confirmation of permissible currents, charging temperatures, terminal connections, cooling and protection requirements.
EVE INP05P CELL
| Manufacturer and Model | EVE INP05P |
| Cell Type | Rechargeable lithium-ion; prismatic aluminum case |
| Minimum Capacity | 5.5Ah 1C, 25±2°C, 2.8–4.2V |
| Minimum Energy | 20.1Wh Manufacturer-specified; 1C, 25±2°C, 2.8–4.2V |
| Nominal Voltage | 3.67V |
| Initial AC Resistance | 0.75±0.10mΩ AC, 1kHz, 30% SOC |
| DC Resistance | 2.35±0.2mΩ 25°C, 50% SOC, 275A, 10s DCR test |
| Charge Limit Voltage | 4.2V |
| Discharge Cut-off Voltage | 2.8V |
| Standard Charge Current | 5.5A (1C) |
| Standard Discharge Current | 5.5A (1C) |
| Cell Height | 65.8±0.4mm excluding terminals 69.1±0.5mm including terminals |
| Width | 121±0.5mm Maximum width at the bottom |
| Thickness | 12.7±0.3mm Measured at 30% SOC under the specified 150kg compressive load |
| Weight | 203±5g |
| Energy Density | Gravimetric: ≥98Wh/kg Volumetric: ≥198Wh/L, excluding terminals |
| Operating Temperature* | −30 to 65°C Power limitation above 55°C; performance-test range only, not a general charging-temperature specification |
| Storage Temperature* | Up to 1 month: −40 to 80°C 1–12 months: −20 to 45°C Both at 30% SOC; subject to the manufacturer's performance-test footnote |
| Cycle Life at 25°C | 5,000 cycles, ≥80% capacity retention 5C charge/5C discharge, 100% DOD |
| Cycle Life at 45°C | 4,000 cycles, ≥80% capacity retention 5C charge/5C discharge, 100% DOD |
| Cycle Life at 60°C | 1,500 cycles, ≥80% capacity retention 5C charge/5C discharge, 100% DOD |
| Discharge Capacity Retention by Temperature | −30°C: ≥65%; −20°C: ≥75%; −10°C: ≥80%; 0°C: ≥85%; 55°C: ≥98% Under the manufacturer's respective test methods; obtain the full procedures before comparing results. |
Technical notes: The 275A/10s condition belongs to the DCR measurement and does not establish an allowable pulse-discharge rating. The 5C/5C values describe cycle tests, not maximum current ratings. *The manufacturer identifies the starred temperature ranges as usable for cell performance testing and excludes cycle testing and long-term storage from that qualification. Confirm application-specific limits and storage instructions before integration. The thickness measurement load is not a pack assembly preload recommendation.
EVE INP05P CELL
Initial AC resistance is 0.75±0.10mΩ at 1kHz and 30% SOC. This provides a defined electrical reference for incoming-cell checks using the same measurement conditions.
The specification lists 5,000 cycles at 25°C, 5C charge/5C discharge and 100% DOD, with at least 80% capacity retention. Actual pack life depends on its operating conditions.
The prismatic format has a specified thickness of 12.7±0.3mm under the stated measurement conditions. Separate body and overall heights help engineers assess terminal clearance and enclosure fit.
The specification includes discharge-capacity retention results from −30°C to 55°C and cycle data at three temperatures, supporting condition-specific evaluation with the manufacturer's full test procedures.
EVE INP05P CELL
The following are potential engineering evaluation directions, subject to confirmation of the complete cell limits and system requirements. They do not represent manufacturer-approved applications.
The 275A value is specified for a 10-second DCR measurement at 25°C and 50% SOC. It does not establish a maximum continuous or allowable pulse-discharge rating.
No. The body height is 65.8±0.4mm excluding terminals, while the overall height including terminals is 69.1±0.5mm. Use the complete mechanical drawing to confirm connection clearances.
It is listed at 25°C with 5C charge/5C discharge, 100% depth of discharge and at least 80% capacity retention. Different temperatures and pack operating conditions can produce different service life.
EVE INP05P CELL
MISEN supports B2B battery cell sourcing and custom battery pack projects. EVE is the manufacturer of the INP05P cell; contact MISEN to confirm model availability, technical requirements and proposed supply terms.
Share your required quantity, destination and purchasing schedule so we can check the exact model, specification revision, available batch information and quotation conditions.
Request the applicable datasheet, mechanical drawing and available transport or compliance documents, subject to availability and sharing permissions. Confirm document scope for the exact cell and intended shipment.
Discuss the target pack voltage, usable capacity, continuous and transient load, enclosure space and operating environment. Integration feasibility, cell matching, BMS requirements and thermal design need project-specific review.
Use the inquiry form on this product page to send your required quantity, delivery country, application and technical requirements. Include EVE INP05P in your message so we can review the correct model.
