loading
EVE
| Availability: | |
|---|---|
| Quantity: | |
EVE M41 CELL
The EVE M41 is a rechargeable prismatic NCM lithium-ion cell with an aluminum case, a nominal voltage of 3.66V and a nominal capacity of 19.5Ah. Its specified initial internal resistance is ≤0.4mΩ. The rectangular format provides a defined geometry for battery module layout and enclosure planning.
For pack integration, evaluate the cell together with its approved current limits, terminal drawing, thermal conditions and protection requirements. MISEN supports cell sourcing and project-specific battery pack discussions. Confirm the applicable manufacturer specification before defining the charging profile, continuous load or transient power requirements.
EVE M41 CELL
| Manufacturer | EVE Energy |
| Cell Model | M41 |
| Chemistry | Rechargeable NCM lithium-ion |
| Case Structure | Prismatic aluminum case |
| Nominal Capacity | 19.5Ah / 19500mAh |
| Nominal Voltage | 3.66V |
| Nominal Energy | Approx. 71.37Wh Calculated: 3.66V × 19.5Ah |
| Initial Internal Resistance | ≤0.4mΩ Confirm measurement method, temperature and SOC in the applicable datasheet. |
| Charge Limit Voltage | 4.2V per cell |
| Discharge Cut-off Voltage | 3.0V per cell |
| Published Charge/Discharge Rate Entry | 5C / 5C Operating conditions and duration require confirmation before application. |
| Current Equivalent at 5C | 97.5A, calculated from 19.5Ah × 5C Not presented as a verified maximum continuous or pulse-current rating. |
| Published Dimensions | 98.8 × 148.7 × 17.7mm Published as length × width × height. Confirm axis orientation, terminal inclusion and tolerances against the mechanical drawing. |
| Weight | 547±15g |
| Gravimetric Energy Density | 130Wh/kg, published value |
| Published Cycle Life | 2,000 cycles |
| Capacity Retention | ≥70% at the stated cycle endpoint |
| Cycle Test Conditions | 25°C; charge/discharge rates and complete procedure subject to confirmation in the applicable manufacturer datasheet |
Technical note: Confirm the applicable specification revision before final design. Published language versions differ on cycle-test discharge rate. The 5C/5C product-table entry does not establish the test conditions for the 2,000-cycle result. Charging temperatures, maximum continuous current, pulse conditions and mechanical installation requirements must be verified separately.
EVE M41 CELL
The nominal voltage and capacity correspond to approximately 71.37Wh per cell, calculated. Usable pack energy depends on configuration, load, temperature, aging and the selected operating window.
Initial internal resistance is specified at ≤0.4mΩ. Use the manufacturer's measurement method and conditions when establishing incoming-cell acceptance criteria or comparing resistance across candidate models.
The aluminum-case structure offers a rectangular format for module layout. Confirm dimensional tolerances, terminal clearances, joining methods and mounting conditions before designing the enclosure and interconnections.
Published cycle data provides a reference for qualification planning. Confirm the complete test procedure for the applicable revision before translating cell-level results into a battery pack service-life target.
EVE M41 CELL
The M41 may be evaluated for engineered mobility and custom industrial battery projects. The directions below require application-specific electrical, mechanical and thermal validation and do not establish drop-in compatibility.
97.5A is calculated from 19.5Ah × 5C. The public rate entry does not provide sufficient duration and operating conditions to establish a maximum continuous rating; confirm the applicable manufacturer specification before design.
No. Cycle performance depends on current, temperature, voltage limits and the complete test procedure. Confirm the revision-specific cycle conditions before comparing results or defining a pack warranty target.
Capacity and chemistry alone do not establish compatibility. Compare voltage limits, permissible currents, terminal geometry, dimensions, mounting conditions and charger/BMS settings before considering replacement.
EVE M41 CELL
MISEN supports B2B battery cell sourcing and custom battery pack projects. EVE is the manufacturer of the M41 cell. Contact MISEN to confirm availability, specification revision and project requirements.
Provide the required quantity, destination and purchasing schedule so we can check the exact model, available batch information and commercial terms before preparing a quotation.
Request available manufacturer specifications, mechanical drawings and applicable transport or compliance documents, subject to availability and sharing permissions. Confirm document scope for the exact model and shipment.
Share the target pack voltage, capacity, continuous and transient loads, available space and operating environment. We can discuss feasibility, cell matching, BMS requirements, connections and thermal design.
Use the inquiry form on this product page to send your required quantity, delivery country, application and technical requirements. Include EVE M41 in your message so we can review the correct model.
