LG
| Availability: | |
|---|---|
| Quantity: | |
CATL CE1L4L36A-117AH CELL
The CATL CE1L4L36A-117Ah is a 3.7V NCM lithium-ion cell in a prismatic aluminum case. It provides at least 117Ah capacity at a 1C discharge rate and at least 120Ah at 1/3C, with corresponding listed energy values of 432.9Wh and 444Wh.
The cell supports 234A continuous discharge at 25 ± 3°C, with listed pulse ratings of 600A for 30 seconds and 850A for 10 seconds under specified test conditions. Its dimensions are 33 × 220 × 105mm, and the listed weight is no more than 1730g.
CATL CE1L4L36A-117AH CELL
| Brand | CATL / 宁德时代 |
| Project Code | CE1L4L36A-117Ah |
| Cell Type | NCM ternary lithium-ion battery cell |
| Cell Structure | Prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Capacity at 1C Discharge | ≥117Ah |
| Capacity at 1/3C Discharge | ≥120Ah |
| Energy at 1C Discharge | ≥432.9Wh |
| Energy at 1/3C Discharge | ≥444Wh |
| Standard Charge Cut-off Voltage | 4.2V |
| Absolute Charge Protection Upper Limit | 4.35V |
| Discharge Cut-off Voltage | 2.75V at room temperature |
| Standard Charge Current | 39A (1/3C) |
| Maximum Continuous Discharge | 234A (2C) at 25 ± 3°C |
| 30-Second Pulse Discharge | 600A under specified test conditions |
| 10-Second Pulse Discharge | 850A under specified test conditions |
| AC Internal Resistance | ≤0.45mΩ at 1kHz |
| Cell Dimensions | 33 × 220 × 105mm |
| Cell Weight | ≤1730g |
| Charging Temperature | -20–55°C with temperature-based current limiting |
| Discharging Temperature | -30–55°C |
| Recommended SOC Range | 10%–90% |
| Cycle Life | ≥2000 cycles; end-of-life capacity ≥80% |
| Gravimetric Energy Density | ≥250Wh/kg at 1C |
CATL CE1L4L36A-117AH CELL
The specification lists at least 117Ah at 1C and at least 120Ah at 1/3C, with energy ratings of at least 432.9Wh and 444Wh respectively.
A continuous discharge rating of 2C (234A) is specified at 25 ± 3°C.
The listed pulse ratings are 600A for 30 seconds and 850A for 10 seconds under the specified test conditions.
The 33 × 220 × 105mm cell weighs no more than 1730g and is specified at ≥250Wh/kg at 1C.
CATL CE1L4L36A-117AH CELL
This high-capacity NCM prismatic cell can be evaluated for EV power packs, industrial equipment and battery energy storage systems based on the electrical and mechanical requirements of the complete system.
EV power battery packs. Assess pack voltage, continuous current and pulse demand against the vehicle’s load profile.
Industrial equipment. Review the 117Ah minimum capacity, current ratings and cell dimensions for the equipment’s operating cycle and enclosure.
Battery energy storage systems. Evaluate cell configuration, charging limits, protection settings and pack-level thermal design.
01. Distinguish the charge limits. The standard charge cut-off is 4.2V; the absolute charge protection upper limit is 4.35V.
02. Separate continuous and pulse current. Use 234A at 2C for continuous discharge at 25 ± 3°C. Apply the 600A/30-second and 850A/10-second pulse values only under their specified conditions.
03. Apply temperature-based charge limiting. Charging from -20°C to 55°C requires current limiting by temperature, as specified for this cell.
4.2V is the standard charge cut-off voltage. 4.35V is the absolute charge protection upper limit.
The specified pulse ratings are 600A for 30 seconds and 850A for 10 seconds under the designated test conditions.
Contact MISEN through the MisenPower technical support page to ask about documents for this model.
CATL CE1L4L36A-117AH CELL
MISEN can discuss sourcing requirements and OEM battery-pack project needs for the CATL CE1L4L36A-117Ah prismatic cell.
Share the required quantity, destination and application to check availability and commercial terms for the requested model.
Request the applicable cell specifications, drawings and supporting documents for the exact model.
Provide target pack voltage, capacity, continuous and pulse current requirements, available space and application details for an initial project review.
Use the inquiry form on the product page and include the required quantity, destination and application to request a quotation.