loading
CATL
| Availability: | |
|---|---|
| Quantity: | |
CATL 95AH PRISMATIC CELL
The CATL 95Ah NCM lithium-ion cell is a prismatic aluminum-case cell with a nominal voltage of 3.7V and nominal energy of 351.5Wh. It supports a listed maximum charge current of 95A and peak discharge current of 285A.
The cell measures 173 × 45 × 133mm and weighs approximately 2.0kg. With a 4.2V charge cut-off and 2.75V discharge cut-off, it can be evaluated for EV battery packs, industrial equipment and battery energy storage systems.
CATL 95AH PRISMATIC CELL
| Brand | CATL / 宁德时代 |
| Cell Type | NCM ternary lithium-ion battery cell |
| Cell Structure | Prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 95Ah / 95,000mAh |
| Nominal Energy | 351.5Wh |
| Charge Cut-off Voltage | 4.2V |
| Discharge Cut-off Voltage | 2.75V |
| Maximum Charge Rate | 1C |
| Maximum Charge Current | 95A |
| Peak Discharge Rate | 3C |
| Peak Discharge Current | 285A |
| AC Internal Resistance | Below 0.4mΩ |
| Length | 173mm |
| Thickness | 45mm |
| Height | 133mm |
| Cell Weight | Approximately 2.0kg |
| Gravimetric Energy Density | Approximately 175.8Wh/kg |
CATL 95AH PRISMATIC CELL
The 3.7V NCM cell provides a stated capacity of 95Ah and nominal energy of 351.5Wh for battery-pack design.
A 3C peak discharge rate is listed as 285A, supporting evaluation for applications with high peak-load requirements.
The listed maximum charging rate is 1C, equivalent to 95A for the 95Ah cell.
The cell measures 173 × 45 × 133mm and weighs approximately 2.0kg for pack layout and weight planning.
CATL 95AH PRISMATIC CELL
The CATL 95Ah NCM prismatic cell is listed for EV power battery packs, industrial equipment and battery energy storage systems. Confirm the electrical and mechanical requirements of the intended system during cell selection.
EV power battery packs. Evaluate the 95Ah capacity and 285A peak discharge rating against pack voltage, operating loads and vehicle requirements.
Industrial equipment. Match the cell’s voltage, charge rate, current requirements and physical dimensions to the equipment design.
Battery energy storage systems. Assess the cell configuration, system voltage and pack-level protection for the storage application.
01. Match voltage limits. Set charging and pack cut-off limits according to the listed 4.2V charge cut-off and 2.75V discharge cut-off.
02. Account for peak loads. Consider the 95A maximum charging current and 285A peak discharge current when sizing the charger, BMS, conductors and protective devices.
03. Verify the physical layout. Confirm the 173 × 45 × 133mm dimensions, terminal arrangement, spacing and mechanical installation requirements for the battery pack.
The listed charge cut-off voltage is 4.2V, and the listed discharge cut-off voltage is 2.75V.
The maximum charge current is 95A. The peak discharge current is 285A.
Contact MISEN through the MisenPower technical support page to ask about documents for the required cell model.
CATL 95AH PRISMATIC CELL
MISEN can discuss sourcing requirements and OEM battery-pack project needs for the CATL 95Ah NCM prismatic cell.
Share the required quantity, destination and application to check availability and commercial terms for the requested cell.
Request the applicable cell specifications, drawings and supporting documents for the required model.
Provide target voltage, capacity, charge and discharge current, available space and application details for an initial pack review.
Use the inquiry form on the product page and include the required quantity, destination and application to request pricing and project support.
