loading
CATL
| Availability: | |
|---|---|
| Quantity: | |
CATL XH-CATL-NMC72 CELL
The CATL-branded XH-CATL-NMC72 listing describes a 72Ah, 3.7V NCM lithium-ion cell in a prismatic aluminum case. Its stated nominal energy is 266.4Wh, and the listed dimensions are 22 × 220 × 105mm.
The supplied information specifies a recommended SOC range of 10%–90%, an AC internal resistance of ≤0.8mΩ at 1kHz and a 25°C cycle-life figure of ≥2000 cycles. Confirm the original manufacturer model, charge and discharge limits, test conditions, terminals and mechanical drawing before using the cell in a pack. Pack protection and thermal requirements depend on the final design and application.
CATL XH-CATL-NMC72 CELL
| Brand | CATL / 宁德时代 (as supplied) |
| Product Number | XH-CATL-NMC72 |
| Original Manufacturer Model | To be confirmed |
| Cell Chemistry and Format | NCM lithium-ion; prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 72Ah (72,000mAh) |
| Nominal Energy | 266.4Wh (as supplied; 3.7V × 72Ah = 266.4Wh calculated) |
| Working Voltage Range | 2.75–4.25V; separate charge and discharge limits to be confirmed |
| Recommended SOC Range | 10%–90% |
| AC Internal Resistance | ≤0.8mΩ at 1kHz |
| Charging Temperature | 0–55°C; measurement basis to be confirmed |
| Discharging Temperature | -20–55°C; measurement basis to be confirmed |
| Discharge Current Rating | Not provided |
| Thickness (T) | 22mm |
| Width (W) | 220mm |
| Height (H) | 105mm |
| Cell Weight | 1.17 ± 0.05kg |
| Gravimetric Energy Density | Approximately 227.7Wh/kg (266.4Wh ÷ 1.17kg calculated) |
| Cycle Life | ≥2000 cycles at 25°C; capacity-retention threshold and test procedure not supplied |
CATL XH-CATL-NMC72 CELL
The supplied values specify 72Ah at 3.7V. Nominal energy of 266.4Wh is consistent with the calculation 3.7V × 72Ah.
The listed 22mm thickness may assist preliminary space planning. Confirm the full drawing, terminal positions, tolerances and installation clearances before mechanical design.
The supplied information lists a recommended 10%–90% SOC window, 0–55°C charging and -20–55°C discharging. Confirm measurement basis and operating restrictions with the manufacturer.
An AC internal resistance of ≤0.8mΩ at 1kHz is listed. Confirm the measurement SOC, temperature and acceptance criteria before comparing cells or setting matching requirements.
CATL XH-CATL-NMC72 CELL
This prismatic cell may be evaluated for custom battery-pack projects where verified electrical, mechanical and thermal limits match the system. Application suitability must be established for the specific pack and use conditions.
Electric mobility pack projects. Consider for assessment where the enclosure, voltage architecture, load profile and system-level safety requirements are compatible.
Golf cart and industrial equipment packs. Evaluate only after confirming current demand, cycle profile, thermal management and the cell’s verified discharge rating.
Custom OEM battery systems. The 72Ah capacity and prismatic format may be assessed for OEM designs after the original model and dimensional drawing are confirmed.
01. Confirm model identity and voltage limits. The product number is XH-CATL-NMC72, while the original manufacturer model is still unconfirmed. Verify charge ceiling and discharge cutoff separately; the supplied 2.75–4.25V range does not define both limits by itself.
02. Verify the physical interface. Check T/W/H dimension order, tolerances, terminal structure, spacing and insulation against the actual cell drawing.
03. Design pack protection for the application. The supplied data does not include a discharge-current rating. Confirm current limits before selecting the BMS, fuse, busbars, conductors and thermal design.
XH-CATL-NMC72 is the product number supplied for this listing. The original manufacturer model remains to be confirmed; request the cell label and manufacturer documentation before treating it as an official model identifier.
No discharge-current rating was included in the supplied product information. Confirm the manufacturer’s continuous and any time-limited current ratings and their test conditions before pack design.
Use the MisenPower technical support page to inquire about documents for the exact model. Availability and sharing permissions should be confirmed.
CATL XH-CATL-NMC72 CELL
MISEN can discuss sourcing requirements and OEM pack project needs for the listed cell. CATL is identified as the brand in the supplied product information; confirm the original model and manufacturer documentation for the exact item before ordering.
Provide the required quantity, destination and intended application so availability and commercial terms can be checked for this exact product number.
Request the manufacturer datasheet, drawing and applicable supporting documents. Availability and sharing permissions must be confirmed for the specific model.
For a pack project, share target voltage, capacity, continuous and peak current, installation space, operating environment and duty cycle for an initial technical review.
Use the inquiry form on the product page and include the product number, required quantity, destination and application. Mention any required documents so availability can be checked.
