loading
CALB
| Availability: | |
|---|---|
| Quantity: | |
CALB L300N218A CELL
The CALB L300N218A is described as a rechargeable NCM lithium-ion cell with a prismatic aluminum-alloy housing. Its stated nominal capacity and voltage are 218Ah and 3.66V at 1C, or 223Ah and 3.73V at 1/3C.
The cell is listed with a 654A short-pulse discharge value for 10 seconds under the referenced specification procedure. Pack designers should confirm the applicable test conditions, temperature-dependent current limits and mechanical requirements before integration.
CALB L300N218A CELL
| Brand | CALB |
| Cell Model | L300N218A |
| Cell Chemistry | NCM lithium-ion |
| Cell Format | Prismatic cell with aluminum-alloy housing |
| Nominal Capacity | 218Ah at 1C; 223Ah at 1/3C |
| Nominal Voltage | 3.66V at 1C; 3.73V at 1/3C |
| Approx. Nominal Energy | 797.88Wh at the 1C rating; 831.79Wh at the 1/3C rating, calculated from the stated voltage and capacity |
| Working Voltage at Normal Temperature | 2.8V to 4.35V |
| Working Voltage at −30°C to 0°C | 2.2V to 4.35V; applicable operating conditions to be confirmed |
| Standard Charge Current | 72.7A |
| Standard Discharge Current | 72.7A |
| Maximum Charge Rate | 1.2C at 20°C to 45°C |
| Maximum Normal Discharge Rate | 1C at 20°C to 40°C |
| Maximum Short-Pulse Discharge | 654A for 10 seconds; referenced specification section 4.3.2 conditions apply |
| Initial AC Internal Resistance | 0.35–0.45mΩ at 1kHz, new cell, 70% SOC |
| Recommended SOC Range | 5% to 97% |
| Cell Dimensions | 37.8 ± 0.3mm thick × 300.0 ± 0.5mm long × 127.0 ± 0.6mm high |
| Cell Weight | 3370 ± 30g |
| Stated Charge Temperature | −20°C to 55°C with current limits; temperature-dependent charging conditions require confirmation |
| Stated Discharge Temperature | −30°C to 55°C; measurement basis and current limits to be confirmed |
| Stated Cycle Life | ≥2,000 cycles at 80% capacity retention; test temperature, rates and depth of discharge to be confirmed |
The 654A value is a 10-second short-pulse figure, not a continuous discharge rating. Confirm section 4.3.2 and the temperature-dependent charge limits before pack design.
CALB L300N218A CELL
01Capacity at Two Discharge Rates
The stated nominal capacity is 218Ah at 1C and 223Ah at 1/3C, with the corresponding nominal voltage specified for each rate.
0210-Second Pulse Discharge
The provided short-pulse discharge value is 654A for 10 seconds under the referenced specification procedure. It should not be treated as a continuous rating.
03Defined AC Resistance Conditions
The initial AC internal resistance is stated as 0.35–0.45mΩ at 1kHz for a new cell at 70% SOC.
04Stated Cycle Performance
The provided cycle-life figure is at least 2,000 cycles at 80% capacity retention. Test temperature, rates and depth of discharge require confirmation.
CALB L300N218A CELL
The L300N218A may be evaluated for custom mobility, industrial power or energy-storage battery projects where its capacity, verified current limits and dimensions meet the application requirements.
Before selection, confirm the 10-second pulse test conditions, permitted charging current at each temperature, terminal dimensions and available batch documentation. The finished pack requires an appropriately engineered BMS, electrical protection, current-rated interconnections and thermal management.
Compare the CALB 113Ah prismatic NMC cell, or read about prismatic, pouch and cylindrical cell formats.
Why are both 218Ah and 223Ah listed?
The stated nominal capacity is 218Ah at 1C and 223Ah at 1/3C. Each value should be compared with its corresponding nominal voltage and test rate.
Is 654A a continuous discharge rating?
No. The provided figure is a 10-second short-pulse value under the referenced specification procedure. The stated maximum normal discharge rate is 1C at 20°C to 40°C.
Can the cell be charged at 1.2C throughout its temperature range?
No. The provided 1.2C maximum charge rate applies at 20°C to 45°C. Charging outside that range requires the applicable temperature-dependent current limits to be confirmed.
CALB L300N218A CELL
Misen can discuss cell sourcing and custom battery pack requirements based on the intended voltage, capacity, current profile and installation space.
When requesting a quotation, please provide your application, estimated quantity, pack configuration and operating requirements. Availability, cell condition, current specifications and applicable documentation are subject to confirmation for the offered batch.
For cell availability or a project discussion, please use the inquiry form on this product page.
