loading
TAFEL
| Availability: | |
|---|---|
| Quantity: | |
The TAFEL 3.7V 97.5Ah is a rechargeable NCM lithium-ion cell in a prismatic aluminum case. Its calculated nominal energy is 360.75Wh, based on a nominal voltage of 3.7V and capacity of 97.5Ah.
The cell is intended for integration into an appropriately designed battery pack. Confirm the exact model, electrical limits, temperature range and mechanical details before selecting the cell for a project.
| Parameter | Specification |
|---|---|
| Brand | TAFEL |
| Cell Type | NCM lithium-ion |
| Cell Structure | Prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 97.5Ah / 97500mAh |
| Nominal Energy | 360.75Wh, calculated from 3.7V × 97.5Ah |
| Internal Resistance | Approx. 0.35mΩ; measurement conditions to be confirmed |
| Dimensions | 27 × 179 × 130mm, thickness × length × height |
| Cell Weight | Approx. 1.48kg |
| Gravimetric Energy Density | Approx. 243.8Wh/kg, calculated using 1.48kg |
| Volumetric Energy Density | Approx. 574Wh/L, calculated using the stated dimensions |
Confirm the exact model, dimensional tolerances, terminal-inclusive height and resistance test conditions with the supplier.
01. 97.5Ah nominal capacity: The cell has a stated nominal voltage of 3.7V and a calculated nominal energy of 360.75Wh.
02. Prismatic aluminum case: The stated cell dimensions are 27 × 179 × 130mm. Confirm tolerances and terminal dimensions before mechanical integration.
03. Approximate cell weight: At approximately 1.48kg, the calculated gravimetric energy density is about 243.8Wh/kg at cell level.
04. Stated internal resistance: The supplied resistance is approximately 0.35mΩ. Confirm the measurement method and test conditions when comparing cells.
This prismatic NCM cell may be evaluated for custom rechargeable battery packs where its capacity, voltage and dimensions meet the project requirements. Final suitability depends on the electrical load, thermal design, protection system and mechanical integration.
Before pack design, confirm the charge and discharge voltage limits, allowable currents, operating temperatures, cycle test conditions and terminal details for the exact cell model.
How is the 360.75Wh energy figure calculated?
It is calculated by multiplying the stated nominal voltage of 3.7V by the nominal capacity of 97.5Ah.
What are the cell dimensions?
The supplied dimensions are 27mm thick, 179mm long and 130mm high. Whether the height includes terminals should be confirmed.
What is the maximum discharge current?
A maximum discharge current was not included in the supplied information. Confirm it with the supplier before selecting the cell for a specific load.
For a quotation or cell selection discussion, provide the required quantity, pack configuration, operating current, temperature conditions and intended application. Confirm the exact model, availability and applicable technical documents for the proposed order.
Contact Misen through the inquiry form on this page to discuss your project requirements.
