loading
TAFEL
| Availability: | |
|---|---|
| Quantity: | |
TAFEL 135AH CELL
The TAFEL 135Ah is a rechargeable NCM lithium-ion cell in a prismatic aluminum housing. The manufacturer’s introduction lists a capacity of 135Ah at 1C, a nominal voltage of 3.66V at 1C and a continuous discharge current of 135A.
The cell can be evaluated for custom battery pack projects where its electrical and mechanical characteristics suit the intended design. Pack integration requires appropriate cell monitoring, protection, thermal management and verification of the current production specifications.
TAFEL 135AH CELL
| Manufacturer | TAFEL |
| Cell Designation | TAFEL 135Ah NCM cell; manufacturer model to be confirmed |
| Cell Format | Prismatic aluminum housing |
| Cathode Chemistry | NCM |
| Capacity | 135Ah at 1C |
| Nominal Voltage | 3.66V at 1C; 3.7V at 0.3C |
| Approx. Nominal Energy | 494.1Wh, calculated from 3.66V × 135Ah |
| Maximum Cell Voltage | 4.3V |
| Minimum Cell Voltage | 2.8V in the performance summary |
| Continuous Charge Current | 135A / 1C at ≥25°C |
| Peak Charge Current | 400A for 10s at ≥25°C |
| Continuous Discharge Current | 135A / 1C |
| Peak Discharge Current | 400A for 10s |
| Dimensions | Complete dimensions to be confirmed before ordering |
| Operating Temperature | −20°C to 55°C, general range in manufacturer’s summary |
| Storage Temperature | −40°C to 60°C |
| Reported Cycle Life | More than 2,000 cycles at 25°C; 100% depth of discharge, 0.5C charge and 1C discharge. Capacity-retention threshold is not specified in the summary. |
| Gravimetric Energy Density | 210Wh/kg, as stated in the manufacturer’s introduction |
The operating-temperature range is a general summary and does not establish allowable charging current at every temperature. Confirm charge limits, peak-current conditions and installation requirements for the supplied cell before pack design.
TAFEL 135AH CELL
01135Ah NCM Cell
The prismatic cell is specified at 135Ah at 1C, with a nominal voltage of 3.66V at 1C for high-capacity battery pack evaluation.
02Continuous and Short-Duration Discharge
The manufacturer lists 135A continuous discharge and 400A peak discharge for 10 seconds. The peak value should not be treated as a continuous operating rating.
03Aluminum Prismatic Construction
The manufacturer’s design illustration shows an aluminum housing and a vent structure. Confirm the exact terminal and mounting details for the cells being supplied.
04Reported Cycle Test
The introduction reports more than 2,000 cycles at 25°C using 100% depth of discharge, 0.5C charge and 1C discharge. The capacity-retention threshold is not stated in the summary.
TAFEL 135AH CELL
This 135Ah NCM cell may be evaluated for custom mobility, industrial power or energy-storage battery projects. Suitability depends on the required current profile, thermal conditions, mechanical design and applicable system requirements.
Before selecting a cell, confirm the actual dimensions, terminal arrangement, available batch specifications and compatibility with the intended series or parallel configuration. The battery pack should include an appropriately engineered BMS, temperature monitoring and electrical protection.
Explore other NCM battery cells, compare a CALB 113Ah prismatic NMC cell, or read the guide to prismatic, pouch and cylindrical cell formats.
Is 400A the continuous discharge rating?
No. The manufacturer’s introduction lists 400A as a 10-second peak discharge current and 135A as the continuous discharge current.
Why are both 3.66V and 3.7V listed?
The introduction lists 3.66V nominal at 1C and 3.7V nominal at 0.3C. The voltage used for the approximate energy calculation is 3.66V.
Can this cell directly replace another 135Ah prismatic cell?
Not necessarily. Confirm dimensions, terminal connections, voltage limits, current capability, cell condition and BMS settings before considering a replacement.
TAFEL 135AH CELL
Misen can assist buyers with cell selection and discuss battery pack requirements based on the intended voltage, capacity, current profile and installation space.
Please provide your application, estimated quantity and operating requirements when requesting a quotation. Availability, cell condition, current specifications and applicable documentation are subject to confirmation for the offered batch.
For cell availability or a project discussion, please use the inquiry form on this product page.
