loading
CATL
| Availability: | |
|---|---|
| Quantity: | |
NCM2714892 51AH CELL
The NCM2714892-51Ah is a prismatic NCM lithium-ion cell with a rated voltage of 3.65V and a nominal capacity of 51Ah. The specification states a 0.2C discharge capacity of at least 51Ah and a maximum continuous discharge current of 76.5A.
The cell can be evaluated for custom battery packs where its electrical and mechanical characteristics meet the system requirements. Confirm the manufacturer identity, applicable dimensional drawing, charging limits and thermal requirements before completing the pack design.
NCM2714892 51AH CELL
| Cell Model | NCM2714892-51Ah |
| Chemistry | Rechargeable NCM lithium-ion |
| Cell Format | Prismatic |
| Nominal Capacity | 51Ah; ≥51Ah at 0.2C discharge |
| Rated Voltage | 3.65V |
| Nominal Energy | Approx. 186.15Wh, calculated from 3.65V × 51Ah |
| AC Internal Resistance | ≤0.8mΩ; AC measurement after standard charge at 25 ± 2°C |
| Standard Charge | 0.2C / 10.2A CC–CV to 4.20V; stop when current is below 0.05C; total charge time not over 5 hours |
| Maximum Charge Voltage | 4.25V; standard and fast charge procedures specify 4.20V |
| Discharge Cut-off Voltage | 2.8V |
| Maximum Continuous Charge | 1C / 51A CC–CV to 4.20V |
| Maximum Continuous Discharge | 1.5C / 76.5A to 2.8V |
| Thickness | 27 ± 0.5mm |
| Width | 148 ± 0.5mm |
| Body Height | 92 ± 0.5mm excluding tabs in the text; 91 ± 0.5mm in the drawing table; confirm before use |
| Weight | Approx. 0.83kg |
| Charging Temperature | 0°C to 50°C |
| Discharging Temperature | −20°C to 55°C |
| Storage Temperature | Less than one month: −20°C to 45°C; more than one month: −20°C to 35°C |
| Cycle Test | ≥1500 cycles at 25 ± 2°C under the specified standard-charge and 0.2C discharge procedure to 2.8V. The test ends when discharge capacity is ≤80% of the initial C5 capacity for three consecutive cycles. |
The specification reports different body-height values in its text and drawing table. Confirm the applicable drawing and measurement conditions before installation.
NCM2714892 51AH CELL
01. 51Ah Nominal Capacity
The cell is specified at 3.65V and 51Ah, with at least 51Ah discharge capacity under the stated 0.2C test.
02. 76.5A Maximum Continuous Discharge
The specification lists 1.5C / 76.5A maximum continuous discharge to 2.8V. Confirm the complete operating conditions for the intended pack design.
03. 1C Maximum Continuous Charge
The listed maximum continuous charge current is 51A using the specified CC–CV procedure to 4.20V.
04. Defined Cycle-Test Procedure
The specification requires at least 1500 cycles under its 25 ± 2°C standard-charge and 0.2C discharge procedure, using the stated 80% capacity end condition.
NCM2714892 51AH CELL
The NCM2714892 may be evaluated for custom battery pack projects where the cell's voltage, capacity, current capability and dimensions meet the system requirements.
Confirm the applicable dimensional drawing and terminal arrangement before mechanical design. Pack selection should also consider charging control, protection, cell matching and thermal management.
Explore the NCM battery range or read the guide to selecting NMC prismatic cells for battery packs.
What is the maximum continuous discharge current?
The specification lists 1.5C / 76.5A to a 2.8V discharge cut-off. Confirm all operating conditions for the applicable cell revision.
Should the cell be normally charged to 4.25V?
The document lists 4.25V as the maximum charge voltage, while its standard and fast charging procedures specify CC–CV charging to 4.20V. Follow the applicable charging procedure.
What body height should be used for the enclosure?
The specification text gives 92 ± 0.5mm excluding tabs, while the drawing table lists 91 ± 0.5mm. Confirm the applicable drawing and actual cell dimensions before finalizing the enclosure.
NCM2714892 51AH CELL
Misenpower can discuss cell sourcing and selection for your battery project. Please provide the required quantity, pack configuration, current profile, operating temperature range and intended application.
Contact us to confirm the manufacturer, applicable drawing, cell availability and technical information. Product and shipping documentation may be requested, subject to availability and authorization.
Use the product inquiry form to share your project requirements with our team.
