loading
CATL
| Availability: | |
|---|---|
| Quantity: | |
CATL 37AH NCM CELL
The CATL 37Ah is an aluminum-case prismatic NCM lithium-ion cell listed for PHEV, EV and electric motorcycle battery projects. The supplied information specifies a nominal voltage of 3.65V, a capacity of 37Ah and a maximum continuous discharge current of 111A.
The cell is also described in the market as NMC-37C or NMC-37CA. Confirm the exact cell identity and applicable specification before selection. Pack design should account for charging control, current limits, protection, connections and thermal management.
CATL 37AH NCM CELL
| Brand | CATL |
| Manufacturer | Contemporary Amperex Technology Co., Limited |
| Public Sales Designations | NMC-37C / NMC-37CA; exact model and version to be confirmed |
| Chemistry and Format | NCM lithium-ion; prismatic aluminum case |
| Nominal Capacity | 37Ah / 37000mAh |
| Nominal Voltage | 3.65V |
| Nominal Energy | 135.05Wh, calculated from 3.65V × 37Ah |
| Charge Cut-off Voltage | 4.2V |
| Discharge Cut-off Voltage | 2.8V |
| Maximum Continuous Charge | 1C / 37A |
| Maximum Continuous Discharge | 3C / 111A |
| Peak Discharge | 9C / 333A calculated; duration and test conditions to be confirmed |
| AC Internal Resistance | ≤0.8mΩ; measurement conditions to be confirmed |
| Dimensions | 26.7–27 × 148 × 91mm (thickness × width × height) |
| Weight | Approx. 0.84–0.85kg |
| Charging Temperature | 0°C to 50°C |
| Discharging Temperature | −20°C to 55°C |
| Cycle Life | ≥2000 cycles listed; test conditions and capacity retention to be confirmed |
Specifications are based on supplied product information. Confirm the exact model, current limits, temperature-dependent restrictions and dimensional tolerances against the applicable cell documentation.
CATL 37AH NCM CELL
01. 37Ah Prismatic NCM Cell
The listed 3.65V nominal voltage and 37Ah capacity provide a calculated nominal energy of 135.05Wh per cell.
02. Listed 3C Continuous Discharge
The supplied maximum continuous discharge rating is 3C / 111A. Confirm the applicable current and temperature conditions for the exact cell version.
03. Aluminum-Case Prismatic Format
The stated cell dimensions are 26.7–27 × 148 × 91mm. Verify the dimensional drawing, tolerances and terminal arrangement before pack integration.
04. Listed 9C Peak Discharge
A 9C peak discharge rate is provided separately from the 3C continuous rating. Its permitted duration and test conditions must be confirmed.
CATL 37AH NCM CELL
The cell may be evaluated for PHEV, EV, electric motorcycle and custom battery pack projects where its capacity, dimensions and electrical characteristics suit the system design.
Before selection, confirm the exact sales designation and cell version, continuous and peak current conditions, charge profile, thermal requirements and terminal design. The complete pack needs appropriate protection, connections and thermal management.
Explore the NCM prismatic cell range or read the guide to selecting NMC prismatic cells for battery packs.
What is the difference between the 3C and 9C discharge ratings?
The supplied information describes 3C / 111A as the maximum continuous rating and 9C as a peak rating. The peak duration and conditions must be confirmed before use.
Are NMC-37C and NMC-37CA interchangeable?
The relationship between these public sales designations has not been confirmed. Check the exact cell marking and applicable specification before treating them as the same version.
What does the listed cycle life mean?
The supplied information lists at least 2000 cycles, but does not state the test current, temperature or remaining-capacity threshold. These conditions should be confirmed when comparing products.
CATL 37AH NCM CELL
Misenpower can discuss cell sourcing and selection for your project. Please provide your required quantity, application, pack configuration, current profile and operating temperature range.
Contact us to confirm the exact cell model, availability and applicable technical information. Product and shipping documents may be requested, subject to availability and authorization.
Use the product inquiry form to share your project requirements with our team.
