loading
CATL
| Availability: | |
|---|---|
| Quantity: | |
CATL NMC-60C / CATL-NMC60 CELL
The CATL NMC-60C / CATL-NMC60 is described in the supplied product information as a 60Ah, 3.7V NCM prismatic lithium-ion cell with an aluminum case. Its stated nominal energy is 222Wh, and the listed maximum charging current is 60A (1C).
The supplied information lists a 3C–5C discharge range, but does not define whether this is continuous, time-limited or test-specific. Confirm the manufacturer datasheet, terminal drawing, current limits and thermal conditions before selecting the cell or designing a pack. Pack-level protection and operating limits must be engineered for the intended configuration.
CATL NMC-60C / CATL-NMC60 CELL
| Manufacturer | CATL / Contemporary Amperex Technology Co., Limited |
| Model Identifiers | NMC-60C / CATL-NMC60 |
| Cell Type and Format | NCM lithium-ion; prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 60Ah (60,000mAh) |
| Nominal Energy | 222Wh |
| Charge Upper Voltage | 4.2V |
| Discharge Cut-off Voltage | 2.75V |
| Maximum Charge Current | 60A |
| Discharge Rate | 3C–5C listed; |
| Approximate Current at Listed Rate | 180A at 3C to 300A at 5C |
| AC Internal Resistance | ≤0.7mΩ; frequency, SOC and test temperature not supplied |
| Dimensions | 29 × 148 × 103mm; |
| Weight | Approximately 0.98kg |
| Gravimetric Energy Density | Approximately 226.5Wh/kg |
| Charging Temperature | 0–50°C; |
| Discharging Temperature | -20–55°C; |
| Cycle Life | ≥2000 cycles |
CATL NMC-60C / CATL-NMC60 CELL
The supplied information lists 60Ah capacity at a nominal voltage of 3.7V, corresponding to 222Wh nominal energy.
The listed 29 × 148 × 103mm dimensions and approximately 0.98kg mass may help with preliminary pack-space estimates; confirm the drawing, terminal details and tolerances before mechanical design.
A maximum charge current of 60A is specified in the supplied information. Confirm the standard charging profile and temperature-related conditions from the manufacturer datasheet.
The supplied 3C–5C range lacks a duration and test basis. Treat it as an unverified listing value until the manufacturer confirms continuous and any time-limited ratings separately.
CATL NMC-60C / CATL-NMC60 CELL
This cell may be considered for custom battery-pack projects where its verified voltage, capacity, dimensions, current limits and temperature conditions fit the system. The following are preliminary design directions, not manufacturer-approved applications.
Industrial equipment packs. Assess for equipment requiring a custom 60Ah-class pack after the load profile, pack configuration and thermal design are validated.
Stationary battery systems. Consider only where the system voltage, energy requirement, enclosure, protection and applicable system-level requirements are confirmed.
Electrified mobility projects. Evaluate against the vehicle duty cycle, current demand, vibration, cooling and pack safety requirements before selection.
01. Confirm current ratings. Obtain the datasheet definition for the listed 3C–5C discharge range, including continuous or pulse duration, test temperature, voltage cutoff and thermal limits.
02. Confirm physical details. Verify dimension order, tolerances, terminals, insulation and clearances against the actual manufacturer drawing.
03. Engineer the complete pack. Select charger limits, BMS settings, fusing, busbars, sensing and thermal management for the final series/parallel configuration and intended duty cycle.
The supplied data does not specify whether either value is continuous or time-limited. Ask for the manufacturer test conditions before using the rating to size a pack or protection system.
That size is listed in the supplied product information. Confirm dimension order, terminal height, tolerances and the cell drawing before designing a holder or enclosure.
Contact MISEN to confirm which manufacturer documents are available for this exact model and whether they can be shared for your project.
CATL NMC-60C / CATL-NMC60 CELL
MISEN can discuss sourcing requirements and battery-pack project needs for this specified CATL cell. MISEN is the supplier and integration contact for the project; CATL is identified as the cell manufacturer in the supplied product information.
Share your required quantity, destination and project timeline so availability and commercial terms can be checked for the exact model.
Request the applicable datasheet and supporting documents. Availability and sharing permissions must be confirmed for the specific model.
For a pack inquiry, provide target voltage, capacity, continuous and peak current, dimensions, operating environment and application so the configuration can be assessed.
Use the inquiry form on the product page and include the required quantity, delivery destination and application. Please also specify the documents needed so the applicable availability can be confirmed.
