CATL
| Availability: | |
|---|---|
| Quantity: | |
CATL MS7914897-153 CELL
The CATL MS7914897-153 is a reported prismatic aluminum-case NCM lithium-ion cell rated at 3.7V and 153Ah. The supplied product data lists a 2C continuous discharge rating of 306A and approximate nominal energy of 566.1Wh.
These figures are based on user-provided information and have not been checked against a manufacturer datasheet. Confirm test conditions, terminal details and operating limits for the actual cell revision before engineering a pack. Cell-level ratings do not establish pack-level performance or application approval; the finished system requires suitable electrical, thermal and mechanical design.
CATL MS7914897-153 CELL
| Manufacturer / Model | CATL / MS7914897-153 (reference model as provided) |
| Chemistry | NCM lithium-ion (user-provided) |
| Cell Format | Prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 153Ah / 153000mAh; capacity test conditions not provided |
| Nominal Energy | 566.1Wh as supplied; also equals 3.7V × 153Ah (calculated) |
| Charge Cut-off Voltage | 4.3V; conditions not provided |
| Discharge Cut-off Voltage | 2.8V at normal temperature, as supplied |
| Maximum Continuous Charge | 1C / 153A, as supplied; test conditions not provided |
| Maximum Continuous Discharge | 2C / 306A, as supplied; test conditions not provided |
| AC Internal Resistance | Approximately 0.3–0.45mΩ; frequency, SOC and temperature not provided |
| Dimensions (Thickness × Length × Height) | 79 × 148 × 103mm, as supplied |
| Weight | Approximately 2.62kg, as supplied |
| Operating Temperature Range | −30°C to 55°C, as supplied; charging and discharging limits not separated |
| Charging Temperature | Pending manufacturer confirmation |
| Cycle Life | 1500–2000 cycles, as supplied; test protocol and capacity-retention threshold not provided |
| Gravimetric Energy Density | Approximately 216.1Wh/kg, as supplied |
| Volumetric Energy Density | Approximately 470Wh/L, as supplied |
CATL MS7914897-153 CELL
The supplied specification identifies a 153Ah NCM cell in an aluminum-case prismatic format for integration into a custom battery assembly.
The provided data lists 306A maximum continuous discharge at 2C. The manufacturer test conditions and any thermal or duration qualifications still need confirmation.
The supplied nominal energy is 566.1Wh, consistent with the calculation 3.7V × 153Ah. Actual usable energy depends on operating conditions and pack design.
A range of 1500–2000 cycles is provided, but cycle conditions and end-of-life capacity threshold are unspecified. Confirm these details before comparing it with other cells.
CATL MS7914897-153 CELL
The supplied data identifies EV battery packs and custom traction-pack projects as intended directions. These are potential integration contexts, not a statement of manufacturer approval for a specific vehicle or system.
01. Confirm electrical limits. Verify the 4.3V charge cutoff, 2.8V discharge cutoff and current ratings against the original CATL document, including all test conditions.
02. Validate thermal limits. The provided −30°C to 55°C range does not distinguish charge from discharge conditions; charging temperature is still pending manufacturer confirmation.
03. Engineer the complete pack. Cell ratings do not specify pack-level current capability. BMS settings, interconnects, fuse protection, cooling, insulation and enclosure design require system-level validation.
The supplied dimensions are 79 × 148 × 103mm, identified as thickness × length × height. Confirm the measurement orientation, terminal allowance and tolerances against the manufacturer drawing.
The provided data describes 306A as 2C maximum continuous discharge. The source test conditions and any thermal or duration limits have not been supplied, so verify them before design use.
Contact MISEN to confirm whether applicable manufacturer documents are available and can be shared for this model and intended project.
CATL MS7914897-153 CELL
MISEN can discuss sourcing requirements and custom battery-pack integration for projects evaluating this CATL cell. Availability, applicable documents and commercial terms should be confirmed for the specific model and order.
Share the required quantity, destination and project timing to confirm whether this model can be supplied.
Request applicable specifications and drawings, subject to availability and sharing permissions. The data in this draft has not been verified against a manufacturer datasheet.
For a pack inquiry, provide the target voltage, capacity, continuous and peak load profile, operating environment and available space so the design requirements can be reviewed.
Use the inquiry form on the product page to share your required quantity, destination and application. MISEN can confirm availability, documentation and project details in response to the inquiry.