CATL
| Availability: | |
|---|---|
| Quantity: | |
CATL LN52148103-114AH CELL
The CATL LN52148103-114Ah is a 3.7V NCM lithium-ion cell in a prismatic aluminum case. It provides 114Ah nominal capacity and 421.8Wh nominal energy, with a 4.35V charge cut-off and 2.8V discharge cut-off.
The cell supports 114A continuous discharge and a listed 342A peak discharge for 30 seconds. Its dimensions are 52 × 148 × 103mm and its weight is 1800 ± 10g. Use the listed voltage, current, temperature and SOC limits when designing the charger and battery pack.
CATL LN52148103-114AH CELL
| Brand | CATL |
| Cell Model | LN52148103-114Ah |
| Cell Type | NCM ternary lithium-ion battery cell |
| Cell Structure | Prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 114Ah / 114,000mAh |
| Nominal Energy | 421.8Wh |
| Charge Cut-off Voltage | 4.35V |
| Discharge Cut-off Voltage | 2.8V |
| Maximum Continuous Charge | 1C / 114A |
| Maximum Continuous Discharge | 1C / 114A |
| Peak Discharge | 3C / 342A for 30 seconds |
| AC Internal Resistance | ≤1mΩ at 1kHz |
| Cell Dimensions | 52 × 148 × 103mm |
| Cell Weight | 1800 ± 10g |
| Charging Temperature | 0–50°C |
| Discharging Temperature | -20–60°C |
| Recommended SOC Range | 10%–90% |
| Cycle Life | ≥2000 cycles under specification test conditions |
CATL LN52148103-114AH CELL
The 3.7V NCM cell provides 114Ah nominal capacity and 421.8Wh nominal energy for battery-pack design.
The listed continuous discharge rating is 1C, equivalent to 114A for this 114Ah cell.
The specified peak discharge is 3C (342A) for 30 seconds, separate from the 114A continuous rating.
The cell measures 52 × 148 × 103mm and weighs 1800 ± 10g for pack layout and weight planning.
CATL LN52148103-114AH CELL
This 114Ah NCM prismatic cell can be assessed for EV power battery packs, industrial equipment and battery energy storage systems based on the electrical and mechanical requirements of the complete system.
EV power battery packs. Evaluate cell configuration and pack protection against vehicle voltage, continuous load and peak current requirements.
Industrial equipment. Match the 114Ah capacity, current ratings and physical dimensions to the equipment’s duty cycle and enclosure.
Battery energy storage systems. Review the series/parallel arrangement, system voltage, charging profile and protection design for the intended system.
01. Match voltage limits. Configure charging and pack cut-off settings for the specified 4.35V charge cut-off and 2.8V discharge cut-off.
02. Separate continuous and peak loads. Use 114A as the continuous discharge rating and 342A for the specified 30-second peak period.
03. Design the complete pack. Select the BMS, fusing, conductors, busbars and thermal management for the final cell configuration and application.
The listed continuous discharge current is 114A. The peak rating is 342A for 30 seconds.
The cell dimensions are 52 × 148 × 103mm.
Contact MISEN through the MisenPower technical support page to ask about documents for this model.
CATL LN52148103-114AH CELL
MISEN can discuss sourcing requirements and OEM battery-pack project needs for the CATL LN52148103-114Ah prismatic cell.
Share the required quantity, destination and application to check availability and commercial terms for the requested model.
Request the applicable cell specifications, drawings and supporting documents for the exact model.
Provide target pack voltage, capacity, current profile, available space and application details for an initial project review.
Use the inquiry form on the product page and include the required quantity, destination and application to request a quotation.