CATL
| Availability: | |
|---|---|
| Quantity: | |
CATL ND-3.7V 190AH CELL
The CATL ND-3.7V 190Ah is a prismatic aluminum-case NCM lithium-ion cell with a nominal voltage of 3.7V and nominal energy of 703Wh. Its stated maximum charge and continuous discharge ratings are both 1C, corresponding to 190A.
The cell measures 80 × 148 × 106mm (T × L × H, height excluding studs) and weighs 2800 ± 20g. For pack integration, match charger and protection settings to the stated voltage limits, current ratings and temperature ranges, and design the BMS and thermal management for the complete application.
CATL ND-3.7V 190AH CELL
| Brand | CATL / Ningde Times |
| Supplier Model | ND-3.7V 190Ah |
| Battery Type | NCM ternary lithium-ion battery |
| Cell Structure | Prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 190Ah / 190000mAh |
| Nominal Energy | 703Wh |
| Charge Cutoff Voltage | 4.3V |
| Discharge Cutoff Voltage | 2.8V |
| Standard Charge Rate / Current | 0.2C / 38A |
| Maximum Charge Rate / Current | 1C / 190A |
| Standard Discharge Current | 38A |
| Maximum Continuous Discharge Rate / Current | 1C / 190A |
| AC Internal Resistance | ≤0.5mΩ |
| Cycle Life | ≥2000 cycles |
| Dimensions (T × L × H) | 80 × 148 × 106mm (height excluding studs) |
| Cell Weight | 2800 ± 20g |
| Gravimetric Energy Density | Approx. 251.1Wh/kg |
| Volumetric Energy Density | Approx. 560.2Wh/L |
| Charge Temperature | 0–50°C |
| Discharge Temperature | -20–55°C |
CATL ND-3.7V 190AH CELL
The 3.7V prismatic cell is specified at 190Ah nominal capacity and 703Wh nominal energy.
The stated maximum charge current and maximum continuous discharge current are each 190A. The standard charge rate is 0.2C (38A).
The stated dimensions are 80 × 148 × 106mm (T × L × H), with the height measured without studs. Cell weight is 2800 ± 20g.
The supplied temperature ranges are 0–50°C for charging and -20–55°C for discharging.
CATL ND-3.7V 190AH CELL
The supplied application directions for this cell are EV systems and custom traction battery packs. Suitability depends on the electrical, mechanical and thermal requirements of the complete system.
01. Match voltage limits. Configure charging and pack protection with the stated 4.3V charge cutoff and 2.8V discharge cutoff.
02. Size currents to the load profile. Account for the 38A standard charge current and the separate 190A maximum charge and continuous discharge ratings.
03. Check mechanical and thermal integration. Allow for the 80 × 148 × 106mm cell envelope, stud clearance, the specified temperature ranges and pack-level thermal management.
Browse the MisenPower NCM prismatic cell range for other cell formats and capacities.
The supplied reference is ND-3.7V 190Ah. Nominal voltage is 3.7V and nominal capacity is 190Ah.
Maximum charge current is 190A (1C), and maximum continuous discharge current is 190A (1C). The standard charge current is 38A (0.2C).
80 × 148 × 106mm (T × L × H); the stated height excludes the studs.
CATL ND-3.7V 190AH CELL
Share the supplier model and project requirements when requesting information about this CATL prismatic NCM cell. Availability, commercial terms and applicable product documents can be confirmed for the requested model.
Provide the required quantity, destination and application so the requested cell can be checked against your project needs.
You may request applicable specifications or supporting documents for the model; availability can be confirmed when you inquire.
For a pack project, include target voltage, capacity, continuous current, available space and operating environment for an initial requirements review.
Send the cell model, quantity, destination and application through the MisenPower contact form to ask about availability and project support.