CATL
| Availability: | |
|---|---|
| Quantity: | |
CATL LN195 CELL
The CATL LN195 is a 3.7V, 195Ah NCM lithium-ion cell with a prismatic aluminum case and stated nominal energy of 721.5Wh. Its listed maximum charge rating is 1C (195A), while its maximum discharge rating is 3C (585A).
The cell measures 79 × 148 × 103mm (T × L × H), or 106mm high including terminals, and weighs approximately 2.7–2.8kg. Match pack configuration, voltage limits, current requirements and thermal design to the intended EV or custom traction battery application.
CATL LN195 CELL
| Brand | CATL / Ningde Times |
| Reference Model | LN195 |
| Battery Type | NCM ternary lithium-ion battery |
| Cell Structure | Prismatic aluminum case |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 195Ah / 195000mAh |
| Nominal Energy | 721.5Wh |
| Charge Cutoff Voltage | 4.2V |
| Discharge Cutoff Voltage | 2.75V |
| Maximum Charge Rate / Current | 1C / 195A |
| Maximum Discharge Rate / Current | 3C / 585A |
| Internal Resistance | Approx. 0.37–0.7mΩ |
| Cycle Life | ≥2000 cycles |
| Dimensions (T × L × H) | 79 × 148 × 103mm; 106mm including terminals |
| Cell Weight | Approx. 2.7–2.8kg |
| Gravimetric Energy Density | Approx. 257.7–267.2Wh/kg |
| Volumetric Energy Density | Approx. 599.1Wh/L |
| Charge Temperature | 0–55°C |
| Discharge Temperature | -20–55°C |
CATL LN195 CELL
This 3.7V NCM cell is specified at 195Ah nominal capacity and 721.5Wh nominal energy.
The stated maximum discharge rate is 3C, corresponding to 585A. The stated maximum charge rate is 1C, or 195A.
The cell measures 79 × 148 × 103mm, with a stated height of 106mm including terminals.
The supplied operating ranges are 0–55°C for charging and -20–55°C for discharging.
CATL LN195 CELL
The supplied application directions are EVs and custom traction battery packs. Evaluate the cell against the electrical, mechanical and thermal requirements of the complete system.
01. Match voltage limits. Configure charging and pack protection for the stated 4.2V charge cutoff and 2.75V discharge cutoff.
02. Check current requirements. Compare the system load and charger current with the stated maximum ratings of 585A discharge (3C) and 195A charge (1C).
03. Confirm the full cell envelope. Allow for 79 × 148 × 103mm cell dimensions and 106mm height including terminals when checking space and clearances.
Explore the MisenPower NCM prismatic cell range for other form factors and capacities.
The reference model is LN195, with a nominal capacity of 195Ah and nominal voltage of 3.7V.
The maximum charge rate is 1C (195A), and the maximum discharge rate is 3C (585A).
The stated cell height is 103mm; the height including terminals is 106mm.
CATL LN195 CELL
When requesting information about the CATL LN195 cell, share your required quantity, destination and application. Availability, commercial terms and applicable product documents can be checked for the requested model.
Provide the reference model and project requirements to check fit for your application.
You may request applicable specifications and supporting documents; availability can be confirmed for the model.
For a pack project, share target voltage, capacity, current needs, available space and operating environment for an initial requirements review.
Send your model, quantity, destination and application through the MisenPower contact form to ask about availability and project support.