The SVOLT 50Ah cell combines lithium iron phosphate chemistry with a flat pouch format for engineered battery assemblies. Its 3.2V nominal voltage and 50Ah rated capacity correspond to approximately 160Wh of calculated nominal energy per cell. MisenBattery supplies this third-party cell for custom pack integration projects. The supplied product images provide preliminary specifications; final selection requires confirmation of the exact model, dimensional drawing and complete electrical operating limits.
01 50Ah Rated Capacity
Both supplied specification images identify a capacity of 50Ah at a 0.5C test rate. This provides a consistent capacity reference for preliminary cell selection and pack sizing. The equivalent test current is 25A, calculated from the stated capacity; it must not be interpreted as the cell’s maximum continuous discharge rating.
02 Approx. 160Wh Nominal Energy
Multiplying the nominal voltage of 3.2V by the rated capacity of 50Ah gives approximately 160Wh per cell. This calculated value supports initial energy-budget comparisons between pack configurations. Actual usable energy depends on operating conditions, discharge current, temperature, ageing and the voltage limits selected for the completed battery system.
03 Defined LFP Voltage Range
The supplied materials identify lithium iron phosphate chemistry, a nominal voltage of 3.2V and a stated voltage range of 2.3–3.65V. These values provide a starting point for evaluating series configurations and compatible charging systems. Final charger settings and BMS protection thresholds must follow the confirmed manufacturer specifications for the exact cell.
04 Flat Pouch Construction
The illustrated pouch construction offers a flat cell geometry for evaluating stacked battery layouts. Both images list 325 × 108mm for the larger dimensions, while thickness differs between 13.5 and 13.6mm. Confirm the production drawing, tab clearances, dimensional tolerances and mechanical support requirements before committing to an enclosure design.
05 0.93kg Cell Weight Reference
A cell weight of 0.93kg is stated consistently in both supplied images, giving pack designers a useful reference for early mass estimates. Complete battery weight must also include interconnects, the BMS, protective components, insulation, mechanical supports and the enclosure. Production weight tolerances are not included in the available image specifications.
06 Reported 6000-Cycle Performance
The supplied materials report 6000 cycles, with the more detailed image specifying 25°C and a 0–100% SOC range. This is a source-reported figure, not an unconditional service-life guarantee. Charge and discharge rates, the remaining-capacity threshold and other test conditions must be verified before comparing durability or defining a project warranty.
Custom battery pack applications: MisenBattery supplies cells and supports custom pack integration for projects such as stationary energy storage and backup power, subject to electrical and mechanical qualification. Pack design should include a compatible BMS, fuse protection, voltage and temperature sensing, insulation, appropriate spacing, thermal management and pouch support. Use a manufacturer-approved tab connection process, including welded interconnects where specified. Confirm applicable CE, UN38.3, RoHS and UL documentation requirements and availability for the exact cell, completed pack and shipment; the supplied images do not establish certification status.
